Drill And Countersink In One Go
Each bit drills the pilot hole and cuts the cone for the screw head at the same time.
No More Splintered Edges
The built-in depth stop rests on the surface so you never drill too deep or scratch the wood.
The Right Size For Every Screw
Five bits from 2.8 to 4.0 mm in alloy steel cover the most common wood screws.
Clean, Professional Results
Screws that sit flush, on every shelf, cabinet and frame you build.
- 95% got flush screw heads first try
- 91% saw fewer splintered holes
- 87% switched bits faster
One Bit Instead Of Two
A regular bit only drills. Sinkpro drills, countersinks and stops at the right depth.
| Sinkpro™ | Feature | Regular drill bits |
|---|---|---|
| Drills & Countersinks | ||
| Built-In Depth Stop | ||
| Flush Screw Heads | ||
| Clean Hole Edges | ||
| 5 Sizes In One Set |
Ofte stilte spørsmål
Which drill do I need?
Any standard drill or cordless driver with a chuck that holds a round shank.
Can I change the depth?
Yes. Loosen the small locking screw, move the stop to the depth you want and tighten it again.
Does it work on hardwood?
Yes, it is made for soft and hard wood, and also works on plastic and PVC.
Which size should I use?
Match the bit to your screw: smaller bits for thin screws, the 4.0 mm bit for bigger ones.
How long does shipping take?
Delivery times for your country are shown at checkout, and every order ships with a tracking number sent to you by email.
What if it's not right for me?
You have 14 days from delivery to return it. Just contact our support team with your order number.
Våre løfter
14 dagers returrett
Ikke fornøyd? Send den tilbake innen 14 dager etter levering.
Sporbar frakt
Alle bestillinger sendes med et sporingsnummer.
Vennlig kundestøtte
Spørsmål? Teamet vårt hjelper deg gjerne.
